Showing posts with label Clothing: Socks/Stockings. Show all posts
Showing posts with label Clothing: Socks/Stockings. Show all posts

Saturday, June 1, 2019

DIY SOCK FIX: Make Socks Actually Fit Your Calves!

(Topic: DIY, Crafts, Socks)

Hi Friends,

If you have calves that are anything larger than twiggy, you might notice that sometimes socks with patterns just don't fit quite right!!

I now know to check the inside of the sock for long threads, but I still have socks in my drawer that weren't fitting right.

So what's the actual issue? Socks are a knitted item, and the curve of the thread going up and around, and down and around, to make a stitch, is what makes knitwear stretchy. When you work with two colors, though, the other color has to hide somewhere, and often they are just carried across the back of the knit item as a "float" (a long thread). A good knitter will keep the floats short (which will keep the fabric stretchy) or will use special techniques to integrate them but keep them hidden, and will also make sure the float doesn't get too long. If the float gets long, then that portion of the knit won't be able to stretch any wider than the length of the float.

So, socks: in patterned socks that are knit by machines and designed on computers (so no one is personally handling the length of each float as it occurs), there is often the potential for long floats. Many sock companies trim them for us (thanks!!!) but some sock companies just leave them there. As long as they aren't trimmed too closely, the ends of the thread will just puff up a bit and they won't pull out of place, so having them clipped means the sock stretches (and the design stretches too, more importantly!). But on socks where they aren't clipped, if your leg is bigger around than the sock's floats, then the sock is too tight, is uncomfortable, and slides down.

Note how some of the snowflakes on the leg of the sock are connected, and around the top (which is the widest part of my calf!!!) the floats connect ALL the snowflakes all the way around the sock.

The white thread they used is actually a bit stretchy, but not enough to actually fit around my calf. See how the snowflake on the top left just kinda drifts into the snowflake on the top right? Those threads are the worst problem. The long threads within each snowflake may or may not be an issue, depending on individual length.

STEP ONE:
Stretch the sock over your hand or a water bottle. This allows you to see where the tight spots/long threads are, and to access them well. If you're not sure if it's a long thread vs. part of the design, scrunch the sock a little: a long thread will ripple, whereas if it's part of the design it will scrunch the same as the background of the sock.

Stretch the sock over your hand to see how the threads are too tight. Tight areas are where you'll need to work.
STEP TWO:
Using snubnosed craft scissors (sharp points might damage the socks - I've lost a few that way...), slide the blades under the long strings you want to cut. Make sure you can see the tip of the bottom blade, so you know you're not hooking the actual sock fabric.

Slide under the long threads, and make sure you can see the scissor tip again before you snip.

The threads puff up a bit once cut, which is great because they won't slide out of the design.

Look how far it can stretch now!

Note that sometimes the sock background color has floats too. You can cut them as well. My rule of thumb: if it's long enough that my scissor blade fits under it without forcing, then it's long enough to be cut. Cut in the center of the float. NOTE: IF YOU CUT AT ONE END OF THE FLOAT, IT MAY SLIP OUT OF THE PATTERN AND CAUSE A HOLE IN YOUR SOCK.
When you're done, the design on the sock will look the same, but it'll be SOOOOO much comfier on your foot!

My tip is to check any new socks you buy to make sure they don't have long floats - but this is a great fix for any socks that have been languishing in the back of the drawer unworn because they weren't comfy around your calf!

Yours,

Sarah

To subscribe, find the "subscribe by email" note in the left column and enter your email there. Links to posts will be emailed directly to you whenever I post them! Nothing else gets emailed.

Resource list: Visit my spreadsheet at www.tinyurl.com/infantloss

Saturday, December 8, 2018

A Stocking for Pookie

(Topic: Knitting)

Hi Friends!

Recently I realized that, as Pookie has been more and more a member of our family in his own right (Who is Pookie? click here), and with the holiday season upon us, that he might need a stocking of his own!

I have successfully made two things with heels - which is not to say that the items or the heels were particularly successful, just that they are heels! But I had not up to this point actually made a sock with a turned heel using any specific method.

The first turned heel, made up as I went along (i.e. figuring out what reductions and additions made sense). Problem was, it was a non-stretchy choice of stitches in non-stretchy cotton - totally unworkable as an actual sock.
Charlie's stocking, my other heel: shaped flat, then seamed.

I mentioned to the ladies at my local yarn shop that I wanted to do a stocking but didn't know how to turn a heel. They told me to bring yarn, and they would help! So the next day I went there and got started with a light blue yarn that matches Pookie's fur.

Turkish cast-on, halfway through a Fliegel heel.

It went well and turned out fine, I just didn't love it for several reasons: The yarn didn't end up being one I liked, the stocking ended up really floppy (mostly due to the yarn), and the stocking ended up way bigger than I wanted it to be.

Picture with Pook, for size comparison!

Since I wasn't happy with it, I decided to cast on a new one, now that I knew how to do magic loop, Turkish toe, and a Fliegel heel!

I found a dark blue (with teal leanings) that I liked, and cast on a very small start. I actually could have done a bigger toe and not made it so pointy - oh well!

I also had been watching the ladies at the yarn shop do Fair Isle color work, and really wanted to get in on that game! I picked a coordinating brown/fawn color in the same yarn type. I've not done much color work before.

Liking it so far!

Nearly done with the heel. Unlike a normal sock, where the toe and heel have to be at right angles to fit a human foot, I decided that having the toe vertical actually would hang better on a mantelpiece.

Binding off. The P was tricky, and my tension wasn't perfect, but I love the result.

Added a crocheted loop to hang it by.

Ta Da! I love how it turned out!

The full spread.

Pookie with his new stocking and stocking holder! He's pretty pleased.

This was a super fun project! Thanks so much to the ladies at Farmhouse Yarn for all the help.


Yours,

Sarah

To subscribe, find the "subscribe by email" note in the left column and enter your email there. Posts will be emailed directly to you whenever I post them!

Resource list: Visit my spreadsheet at www.tinyurl.com/infantloss

Thursday, December 15, 2016

Tiger Christmas Stocking

Dear Friends...

Yes, another knitted project! This is a Christmas stocking in the favorite colors for a special little boy I know.

Garment Project Data:
- Type: Christmas stocking, meant to be hung
- Date made: December 14th and 15th 2016
- Pattern: Made it up as I went
- Fabric/Materials: Cotton yarn in orange and brown
- Trim: black wool yarn
- Time to finish: 2 days

The first decision was the yarns. The idea was to do tiger stripes, but to use yarns I already had in my stash. I came up with a cotton orange, a cotton brown, and a wool black. I was wary of using the orange with black because of the different materials and thicknesses, and I was worried it would be a very stark look. But just orange and brown seemed a little pale. With the help of some friends, I settled on the brown for the stripes and black for trim.

Here goes! I'm free handing the pattern, so I really didn't plan or gauge. It actually ended up being a little larger around than I'd pictured, but it'll work. You'll notice that despite not working in the round, I'm on round needles again. Here I'm using a size 3, since I wanted a really tight look.

And the heel is turned! I actually goofed a little and one side slants a bit more sharply (a few more rows) than the other side, but I can fix that when I seam up the back. You can see I'm tapering the stripes by doing uneven amounts in each row.

The finished knitted portion.

And done seaming up the back! Since this is going to be a Christmas stocking and not worn, I seamed up the bottom/back (which would be uncomfortable when worn) and didn't worry about actually making the heel a full 90-degree turn. Also, the foot portion is proportionally short, which makes it easy to get things out of the bottom.

And complete! A crocheted scalloped border at the top, and a crocheted loop to hang it from. Weave in the ends, and voilá!

Most sincerely yours,
~ Sarah

Thursday, December 26, 2013

THE DREADED SOCK

Yep, Ladies and Gents, I once tried to make a sock.
.... the yarn is now incorporated into an afghan...

Garment Data:
- Type: SOCK
- Date made: Well, it was never finished... (I don't actually know when I started. I unraveled it in 2008 or so)
- Pattern: None, I made it up as I went along!
- Fabric/Materials: Cotton yarn
- Time to finish: um...


You can see that I was working from top to toe, and had already turned a passable heel.

I just kept increasing in the right place until it looked like i had enough turn to make a sock. I don't know the angle, but it was not 90 degrees.

There are a few things I will do differently the next time I attempt a sock (or two):

  1. Instead of it coming out looking smooth on the outside (knit) and bumpy on the inside (purl) since I just did knit in the round, I would instead do some sort of stockinette stitch to give it more give.
  2. I will use a more elastic yarn, like wool, or perhaps even an elasticized yarn.
  3. I will use bigger needles. I had quite a fine gauge going, and kept my tension quite tight, which also made it hard to work.
  4. I may even try one of the two-at-once techniques, so I don't end up with lonely socks, or with socks of two different sizes!
  5. I'll make the above-the-heel section longer. I know this is a personal taste and aesthetic thing, but honestly I'd probably never have worn that sock even if I had finished it, because it didn't go up high enough!

Well, I'll let you know if/when I make another one. I wonder what that will look like?

... and how long it will take me to finish???

Most sincerely yours,
~ Sarah