Showing posts with label Material: Fringe. Show all posts
Showing posts with label Material: Fringe. Show all posts

Wednesday, December 27, 2017

Santa Pook

🎅

We were out getting a Christmas tree, tromping through the snowy tree field picking one out to cut, when hubby said that Pookie really needed a Santa hat. I agreed, and thought to myself that maybe I could pick one up at a dollar store.



Well...

I found some red fleece and an old sheepskin steering wheel cover, and got carried away...



I fitted it directly on him. It used about a half a yard of fleece, and I cut freehand based on the usual shapes of the pieces, using his measurements to guide me for the widths. I could have narrowed his pant legs a little more; on the other hand, his feet would be harder to get through! The pant legs are shaped normally, but there is an added semi-circle in the rear to accommodate his seat. The arms are plain tubes. The top is a little shaped around the armscyes, and is very short-waisted. The hat is a rectangle with triangles cut out of the top for shaping. And all of the fur edging - which was tricky to sew on! - is from the steering wheel cover. The belt is a ladies belt from Goodwill, much shortened.

Merry Christmas!

Sarah

Tuesday, September 27, 2016

Patch Banner

Dear Friends,

I was recently inspired by something my mother-in-law made for my husband as a child. Everywhere they traveled, they got patches or pins as a souvenir, and in order to create a way to store and display them, she made him a banner. I have copied her pattern for my own patches, pins, and mementos.

Garment Data:
- Type: Patch display banner
- Date made: September 2016
- Pattern: Anne's design
- Fabric/Materials: 3/4 yard felt, cut to a 23" width, dowel, ball-shaped dowel ends
- Trim: Ribbon, braided cord made out of embroidery floss
- Time to finish: 1 hour?

The completed banner. I have it folded in quarters and just basted onto the rod, so that as I fill it up from the bottom, I can lengthen it (this is also in the original design!).

The items on here are: several civil war style cockades and several trinkets that are used to identify that a reenactor has paid the entrance fee for an event. I have patches too, but haven't found which box they are currently in!

Detail of the ribbon I attached by hand stitching. I finished the ends with Fray-Check. And I cut the bottom of the banner into a point (like my husbands) but instead of adding a fringe like his, I cut a fringe of about 2" or 2-1/2" long.

Detail of the dowel, dowel end, braided cord, and basting stitches.

As I hinted on Facebook, I am also working on adapting a t-shirt. I hope to make that the next post but didn't finish it this week.

Thanks to Anne for her inspiration and  design for this banner!

Most sincerely yours,
~ Sarah

Monday, December 30, 2013

1920s dress!

Ladies and Gents,
I was recently asked by a friend to help make them a 1920s costume for a one-time event. I agreed - this could be a fun challenge!
It's not an era I know much about, so I threw myself headlong into research.
One of the notable things I found out is that skirts were not as short as I would have thought! Towards the beginning of the 20s they were quite long - midcalf or longer, sometimes - and only got shorter (though still below the knee usually) by the end of the decade.
The costume I made is not a reproduction. It is in the style of or inspired by and is intended to give the observer the impression of the 20s - but I make no claims to absolute accuracy!

Garment Data:
- Type: Dress, 1920s style, slightly flapper-esque and possibly less-fancy evening wear
- Date made: December 2013
- Pattern: None.
- Fabric/Materials: I used a dress found at Goodwill that had approximately the right shape, including a lace overlay, and went from there.
- Trim: Fringe, ribbon, feathers
- Time to finish: 2 days or so


The original, slightly mother-of-the-bride (or something) dress. Very poly. Has a lace overlay and ghastly puffed sleeves.
So I took the sleeves off! This also gives it a more 20s line.

Started to pin on some fringe I got.
Various trims and accessories draped on the dress prior to assembling it all. Note that the fringe is partly pinned. There is also a band of ribbon, some green trim (that I did not end up using) and a green hat.

I went for two rounds of trim. This is for two reasons:
1: From the pictures I looked at, trim, flounces, or lace was often layered in at least 2 or 3 tiers
2: That's how much fringe I had! :)

Close up of the two-layer fringe. It is hand whipped onto the lace overlay, using the lace design as a guide to keep it level.


Some other props/accessories I gathered. Layers of pearls were sometimes worn, feathers and plumes seemed to be popular, and all the fancy pictures have furs in them!

I've now added some trim right above the fringe.

I thought about adding a pleated sash, but decided it would be a) too heavy, b) too much for the dress as it now looks!

Full outfit, including headband.

Close up of the finished trim!

Headband (early 20s, but too cool to pass up!)

Hat, for the cloche look, for the more "outside" look.

Completed outfit, with hat and fur coat! Really the coat should be as long as the dress or longer, but this one is what I had! I'm pretty pleased with how it turned out. :)
 
And I just found out that there will be a 2nd opportunity for the dress to be worn! Hurrah!

Most sincerely yours,
~ Sarah