Showing posts with label Clothing: Petticoat. Show all posts
Showing posts with label Clothing: Petticoat. Show all posts

Saturday, September 10, 2016

1860s Maternity Dress

Hello Friends,

Recently I decided to try to make a maternity-style dress, with the challenges of being able to accommodate different sizes and shapes that a body does during pregnancy. Since different people also carry differently (like high vs. low), the dress does end up being somewhat personalized (such as shoulder-to-waist length), but is much more flexible in sizing than the typical Civil War era dress, especially in the waist. This dress presented some interesting challenges. In the captions I will note some of the issues I encountered with the final product and possible solutions I could implement.

Garment Data:
- Type: Maternity dress, 1860s-style. Long sleeved, day wear.
- Date made: February 2016
- Pattern: self-drafted, based loosely on the pattern my friend Karen drafted for me, and on resources I read on thesewingacademy.org about how maternity dresses were made.
- Fabric/Materials: A heavy fabric I found at goodwill. Possibly meant for drapery and upholstery, this is actually slightly heavier than I'd normally use for a dress, but still light enough that I dared. Quite stiff.
- Trim: Cotton collar and cuffs.
- Time to finish: A few days?


Unfortunately I didn't get many in-progress pictures as I made it, but I have some detail shots and finished-product pictures, so I'll share those!

The fabric. The geometric pattern is good for Civil War era, but the swirly background is modern...

Sharpie for scale :)
Detail of the front bodice drawstrings. There is a set like this on either side of the front bodice. I created it by sewing a strip of muslin to the widened bodice front, and then sewed down the middle (I did not sew down the ends). I then threaded a bias tape through both tunnels so that the ends came out next to the front closure. Hope that makes sense!

The dress, part way done. Note the pins marking where I'll be putting buttons!
The waist is also bigger than usual, with an 8" overlap. I can change it to match the size needed, just by moving the hooks that close the waistband.

Seated, with hoops (no corset). While a gestational corset could certainly be used, I did not have one to work with. But since the bodice front is made to be more roomy anyway, the shifted and less structured body works beneath it.

Front view. It buttons down the front. Note that you can see the skirt overlap, and that it falls very un-gracefully. I could probably remedy this partially by making most of the skirt gauged instead of wide pleats, and then I could even have the front portion on drawstrings like the bodice so that it is easier to adjust.

Side view. You can see here that the skirt looks a little strained around the circumference of the hoops. I have extra fabric, so if I change from knife pleats to cartridge pleats (gauging), I will also add another panel. This will soften the way the skirt falls, I hope. I will also wash the dress at some point :) and see if the stiffness is partially some sort of sizing. If so, I think it will also hang more naturally after that.


Rear view. They back has not been altered from my normal pattern, so this is pretty standard. YES, I know the petticoat is showing!!! I didn't know it until I saw the pictures, though... :( I will shorten them soon. The petticoats were also made with a longer waistband than usual, but thus also have the overlap/awkward front problem. I think a partial drawstring waist may be a solution that would work, but I need to see if I can find out what was done. Possibly just resetting the waistband each time it doesn't fit well? (If you know, please post in the comments below!!!)

I also made a new narrow collar and white cuffs. Not perfect, but they work. The cuffs should be rotated more toward the back, but otherwise worked pretty well.


Most sincerely yours,
~ Sarah

Tuesday, August 16, 2016

1860s-Style Mourning Dress

Hi Friends,

As some of you know, we recently experienced a loss in our family. This led me (of course!) to looking into historical customs of mourning, specifically for the American Civil War era (1861-65).

Garment Data:
- Type: Dress, specifically for mourning or half mourning, depending on the accessories
- Date made: August 2016
- Pattern: My personalized Civil War "Day Dress" pattern, drafted by my friend Karen, adjusted slightly at the neckline, and with sleeves I drafted myself. Also, assisted by the Dressmaker's Guide by Elizabeth Stewart Clark
- Fabric/Materials: Linen, cotton lining/hem facing, polyester chiffon for the veil
- Trim: Nylon velvet ribbon (1-1/2" and 3/8"), lace (poly?), cotton hem tape (1" twill tape), plastic buttons, 2 pants hooks for waist closure
- Accessories: Brooch, Belt, Belt buckle, Headband, Veil, Hairnet, Shoes
- Time to finish: approximately 3 days

I was originally intending to make this dress from a light-weight or even sheer wool. However, I could not find it easily locally, and since I had a timeline in which I wanted to make it (I wanted to wear it to the Hale Farm (Ohio) reenactment on August 13th), I needed fabric to be available quickly. As it turned out, I knew someone who had over 6 yards of black linen - and, bonus, a roll of 3-1/2" black lace! I did a little bit of research to see if that would work. Linen was rare by this point, so it is a bit of a stretch but still possible.

Due to time constraints, as well as budgetary ones, here are the corners I cut:
- I used linen, a material no longer much in use in the 1860s for dresses
- I used a blue print for the lining rather than a polished cotton
- I did not make or use a bias piping on the armscye
- I did not make/cover a bonnet (though I did buy some of the materials...)
- I forgot pockets
- I used poly chiffon instead of crape

In all, though, it came together well! Here are the pictures:

Cutting the skirt. I based the number of panels on the yardage I had left after cutting the bodice and sleeves. I had enough length left for 3 panels, and they are about 60" wide, so that was fine.

Adding the hem facing at the bottom of the skirt.

Completed skirt (inside out) showing the hem facing.

Nearly completed bodice back. Note that the sleeves are still uncuffed.

Nearly completed bodice front. Note that I have not yet added darts or finished the front edge.


Shoe options at Goodwill. I realized last minute I had no black footwear that would be even halfway passable!!! I went with the top pair due to the overall look and that they were black. The bottom pair had a thick heel and were gray, which I didn't like.

Pinning on the trim. Note that I had already gathered the skirt at this point, using 2 layers of aligned gathering stitches in anticipation of gauging (is that the same as cartridge pleating?). I had tried larger pleats but noticed that the fabric was too bulky, so despite time constraints, I was going to have to gauge the skirt.

Laying everything out to make sure I had everything I needed :)

Completed dress!!! Just in time... this is the night before. I would still have to add the waist hooks in the morning, and complete the headdress and belt, but I had the bulk done! Hurrah!

At Hale Farm. I am wearing a ribbon headband, a hairnet, veil; period glasses, reproduction brooch, gloves; velvet ribbon belt with reproduction buckle; and the dress. The funny wrinkle-tuck at my waist is because I realized that the way I did the waistband of the dress caused the bodice to be too long. I pinned it up for the duration of this event, and will take it in permanently when I have the chance.

Here you can see the line of hem tape as well.


Detail of trim lines at bottom of skirt. They are all sewn on along the upper edge.

Dearest husband is the one taking the pictures! :)

The reproduction brooch by Elizabeth Aldridge, and the matte plastic shank buttons.

Velvet ribbon belt with reproduction buckle by Elizabeth Aldridge. You can see that my "fly" is gaping a little and I had to pin it shut. Not sure how to remedy that. You can also see my hasty pinned tuck to shorten the bodice. I can fix it much more elegantly, but that worked for the day!

Close up of the gauging along the waistband. I folded about 3" of the skirt down, then did pleating stitches in black thread, that stay in the skirt (two parallel lines of stitches, lined up with each other). I then pulled it tight, and matched the skirt to the waistband. I then whip-stitched one side of each pleat to the waistband from the inside, so only the outside edge of the pleat would show from the outside. Time-consuming, but I love the finished effect!!!

Most sincerely yours,
~ Sarah

Friday, August 9, 2013

A "quick-and-dirty" work petticoat

I decided to quickly throw together a petticoat this week! I'd already seamed the panels, and today I decided to finish it (because, after all, I'm going to an event tomorrow - and there's nothing quite like last minute sewing!!).

Garment Data:
- Type: Petticoat
- Date made: August 9th, 2013
- Pattern: None. Based on the basic guidelines by Liz Clark
- Fabric: A basic light-weight cotton in brown with thin woven stripes in a plaid/criss-cross
- Trim: None
- Time to finish: not more than a few hours, total! It was machine sewn, mostly freehand without a lot of pinning
- Notes: Don't look too closely at my hems, seams, or waistband! This is a purely functional petticoat. In fact, I found out that I'd pleated it wrong, so the waistband is a bit big - but, again, functional: not worth redoing!


Approximately half-inch pleats. Not measured - I eyeballed them after dividing the skirt into quarters. That way I knew they'd be roughly even, even if I didn't get them exact.

The waistband, half attached. The white is a piece of muslin inside the waistband, to help give it a bit more oomph. Even so, I got some torquing when I sewed it. This could have been avoided if I had taken the time to pin! It would have also made the seam straighter and tidier on the front :D
Shortcuts do show!
 
Full length view. The back of the dress is clipped in the left side of the hanger, the front of the petticoat, which is flatter and has fewer pleats, is to the right.

The back opening. It has multiple buttons, fairly far in (lots of overlap), because, as noted above, the waistband is actually too large!

Most sincerely yours,
~ Sarah

Sunday, July 28, 2013

Tucked petticoat

Posting some older items, to catch up with what I'm working on now!

Garment Data:
- Type: Petticoat
- Date made: February 2, 2013
- Pattern: Self drafted
- Fabric: Cotton - a basic muslin, white
- Trim: none (but with 3 tucks)
- Time to finish: don't know
- Notes: meant for closest to the body - beneath the hoops. Three 1+1/2 inch tucks 1 inch apart with a 2+1/2 inch hem. Gathered onto a waistband.






Most sincerely yours,
~ Sarah